baboonbottom9

15 Of The Most Popular Peugeot 308 Key Fob Bloggers You Should Follow
Peugeot 308 Key Fob Replacement 
 
Peugeot’s 308 could be catching on a bit, but it still feels appealing. It’s not the most luxurious vehicle in its class, but it’s a pleasant and peaceful driving experience. 
 
Here at Coded Car Keys we are often asked to replace peugeot 308 key fobs. The following tips will help whether the problem is ongoing or intermittent. 
 
Water Damage 
 
If you happen to leave your key fob in a pool or get it wet while kayaking, swimming canoeing, rafting or canyoning, it’s probably to be damaged by water. Keep your key fob in a dry bag whenever you go outdoors or do activities that expose it to excessive water. 
 
You’ll also want to make sure that the fob is dry before opening it up and using it again. If you notice any odors coming from the fob, such as an industrial-type liquid smell or that of windshield washer fluid, this is another indication that it’s submerged in water. 
 
peugeot replacement key that is wet can cause the battery’s energy to drain or even explode. If you are able to get your keyfob 308 from the water, turn the button side up and shake as much water out as you can before opening the casing. Remove the battery, then wipe the circuit board clean using a cotton swab that is dipped in 90 percent alcohol. 
 
Other reasons your Peugeot 308 remote keyless entry system might be unable to function could be due to a dead coin battery, receiver module issues, signal interference, or a faulty electronic chip. If none of the above are the reason, you may try resetting the system by disconnection of the battery that is 12 volts for about 15 minutes. 
 
Dead Coin Battery 
 
Peugeot cars are equipped with a remote-start system that allows the driver to start the car from a distance by warming up or cooling down the vehicle prior to stepping inside. This feature is very beneficial, especially in the cold winter months. The remote start system may be stopped for a variety of reasons, such as the dead battery in the coin-battery. 
 
A coin-shaped battery that is found inside the key fob has a lifespan of two to four years, based on how often it is used and the location where it was purchased. The date of use is typically found on the packaging or marked in the manual. 
 
If the key fob stopped working after being exposed to clean tapwater, take out the battery and clean the electronic chip with a paper towel soaked in isopropyl ethanol. Then, dry the chip thoroughly before replacing. If you expose it to salty or soapy water, the chip may be damaged and you’ll require replacing the key fob altogether. 
 
If you are not sure the battery is faulty you can check its voltage with an instrument set to the vehicle’s voltage range and connected to the terminals for minus and plus. If the voltage is lower than 12-13 volts it is time to replace the battery. You can also reset the computer onboard by disconnecting and reconnecting the 12 volt batteries in reverse order. (positive cable first then negative cable). The engine should then start after this. 
 
Faulty Receiver Module 
 
If you’re unable to see the “Key Detected” message on your dashboard, then it’s possible the receiver module has discovered a problem. It’s the part that transmits an alert when your key fob goes off. It also acts as an alarm and blocks the car from starting if it doesn’t have the correct key. 
 
This can be due to several reasons, such as water damage or simply aging. If the electronic chip in your Peugeot 308 keyfob is damaged due to dirty tap water it could be due to the fact that the keyfob was in contact with it. In this instance you’ll need to remove off the battery and thoroughly clean it with isopropyl alcohol or electronic cleaner. Once it’s dry you can put the battery back in and try it again. 
 
If the issue is not resolved, it is a good idea to visit a local Peugeot expert or locksmith. They can use a diagnostic tool in order to pinpoint the problem and then fix it. 
 
Losing your Peugeot car keys could be an extremely stressful experience. A professional auto locksmith can solve the issue in a matter of minutes. They can program your car and cut a new, functioning key for you. Click here to find a locksmith in your area. 
 
Electronic chip that is malfunctioning 
 
The electronic chip inside the Peugeot 308 key fob is an vital component of the remote control system. If the chip is damaged, you may be unable to start your car or receive a message saying “anti-theft”. If this occurs, the only solution to fix the issue is to obtain a new key. Auto locksmiths who are professionals are able to provide the fastest possible time. 
 
The chip in the key fob of your Peugeot 308 may fail due to various reasons, including sweat, water damage, or dirt. If your Peugeot key fob has been exposed to dirty or soapy water, it should be cleaned immediately. You can employ a paper towel as well as isopropyl alcohol for cleaning the electronic component. The battery should then be allowed to dry completely. 
 
Radio interference can cause the key fob to cease working. This could be caused by other devices that operate on the same frequency as your Peugeot key fob. It could also be caused by weather conditions or objects that are in the vicinity of the vehicle. If you encounter this issue, it is best to visit a Peugeot dealership. 
 
 
The Peugeot key fob 207/308 is very delicate and requires care. It is not recommended to drop it or throw it around. If you lose it, try to find it as quickly as you can. You can reset your on-board computer by disconnecting the battery for a few minutes. Be sure to disconnect the negative cable first, and then the positive.