bengalquill3

5 Laws That Will Help The Saab 93 Key Fob Industry
How to Replace a Saab 9-3 Key 
 
The Saab 9-3 has a good attraction for drivers. It offers good visibility and a powerful performance engine. It has a high safety rating. 
 
It is crucial to have two keys that are compatible for your vehicle. It can be expensive to replace a key if you lose it. 
 
How to Replace the Ignition Key in the Saab9-3 
 
 
You’ll need to replace the car key in case it isn’t turning. This guide will walk you through the steps to do it on a Saab 9-3. You’ll need a replacement key, a new reprogrammable battery, and a new key-fob case. 
 
Unlike older models, most modern Saab vehicles use a transponder in the key-fob instead of a physical key to unlock and start the vehicle. The reprogrammable batteries inside the key-fob will eventually become worn out and can’t hold any charge. This is particularly when you keep using the same key for the same lock. 
 
A professional locksmith can replace the battery quickly. If you’ve got the right tools and patience you can do it yourself. The first step is taking the key-fob from its case. Insert a flathead into the slot in the middle of your case. You will need to take your time, as the plastic is very thin and can be damaged easily. 
 
Once the case has been opened, you can create the new key by combining the lower portion of the old key along with transponder and banana. This will ensure the new key is properly mated to your CIM and could make a huge difference when replacing the sole key on your Saab 9-3. 
 
How do I replace the ignition Key on the Saab 900 
 
If you don’t have two keys, you’ll have to remove the steering wheel and dashboard to get to the ignition. Begin by disconnecting the negative battery cable. After the battery has been disconnected, you can remove all trim pieces and dashboard pieces that surround the steering wheel. Once the dash has been removed, insert an screwdriver into the opening behind the ignition switch. 
 
The ignition cylinder is fitted with a key lock which could prevent the vehicle from starting if it doesn’t have the key in it. If the ignition switch on your 900 isn’t working, check the key to see if it’s in the lock or snared into the ignition barrel. You should also rotate your keys and keep them clean to avoid being bent. 
 
Saab cars are different from other cars in the sense that they don’t use traditional metal keys. Instead, the car recognizes the electronic signals generated by the key fob through a special chip embedded in it. 
 
If you lose only one functioning key fob, your dealer will charge an extra fee to replace your computer module (also known as the CIM). But we can reprogram your computer’s EEPROM, and then prepare it to accept new keys without replacing it. This will save you up to 50% of what the dealer charges! This is the SAAB KEY PROGRAM. Find out more here! 
 
How to Replace the Ignition Key on a Saab 9-5 
 
The metal portion of the classic Saab keys is easy to copy and doesn’t represent a significant risk to vehicle theft. The electronic portion of the key-fob comes with an embedded chip that can identify the car when the key is inserted in the ignition switch. 
 
Saab’s anti-theft device has been relying on this technology for over 10 years. It’s not quite as effective as a door lock but it does make stealing your car a lot more difficult. Every Saab owner needs to keep an extra Saab key in their vehicle. 
 
The majority of new Saabs come with two keys. However, they can be added at the dealer’s expense using a handheld device known as Tech-2. Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this rule is the NG 9-3 cars, with more modern, newer features that require a key-fob. 
 
If you lose all keys and the dealer replaces your CIM or TWICE modules and charge you a premium for it. But we can reprogram the EEPROM on your computer and set it up to accept new keys, and not replace the expensive modules. 
 
How do you replace the ignition Key in a Saab XC90 
 
If your SAAB 9-3 key fob is experiencing issues turning the barrel of the lock it’s possible that it’s time to replace it. The procedure is rather simple and doesn’t need you to visit a dealer. You can complete the process at home using just a few simple tools. 
 
It is first necessary to prepare the new keys. Before you start, disable the anti-theft system by placing blocks under your rear wheels and releasing your handbrake. Then, you can put the key in the ignition and move it to the on position, which activates the accessories, but doesn’t start the engine. Repeat this five times, then keep the key in the on position. 
 
Next, you’ll need to find a new case for your old key fob. These are available at most auto parts stores and are usually very affordable. Depending on saab key programming , you could even get them without any electronics. 
 
To open up the case, put an flathead screwdriver into the slot that is in the middle. Gently work it. The case should split easily, and once you do, you’ll have access to the internal electronics. Use a flathead screwdriver to gently remove the electronics.