couchnews1

10 Unexpected Saab 9-3 Key Replacement Tips
How to Replace the Replacement Key Battery For the Saab 9-3 
 
Saab owners have a unique set of steps to add another key. saab 9-3 key fob replacement www.g28carkeys.co.uk requires an electronic handheld computer, referred to as Tech-2 which is to be used by the dealer. Then, a new transponder and key must be purchased. 
 
Rotate your keys to stop one from wearing out quicker than another. This will keep your keys in good condition. 
 
Replacement Case 
 
The new key fobs for keys are not like the older Saab keys. They feature electronic components which make it hard to copy. That has made car theft considerably more difficult than it was a few years ago. It has also made it more expensive to replace keys lost. 
 
Every owner of a Saab 9-3 should have at a minimum two functioning keys. If one of them is lost, it costs a fortune to get another one for the car since it requires replacing the CIM module and reprogramming the locking cylinders. Dealers will typically charge $100-$200 for this. 
 
There are a few ways to avoid these costly. Some parts dealers will look up the code from an extra key (usually the same one that opens the doors and turns the ignition) and cut a brand new metal key blade at just a fraction of dealer cost. The key must, however, be the same as the original one in order to function in your vehicle. 
 
Follow these steps to replace the case. You’ll require an open-faced screwdriver and a lot of patience. With the screwdriver you can pull away the plastic and take out the emergency key. Once the case is open take the electronics out and put them in the new case. Put the correct key and badge inside the case. 
 
Replacement Battery 
 
The Saab 9-3 replacement battery is a low-cost part that can be quickly and easily replaced. Cyclone’s YouTube video Cyd demonstrates how you can replace the battery for the remote fob in just four easy steps. This tutorial should work for any modern saab-type key fob, however the procedure might differ slightly. 
 
The first step is to locate the button that will release the backup key in the fob. It is usually located just below the Saab logo on the back of the fob. Use a flathead screwdriver to insert the screwdriver in the small hole on this button. This should be enough to open the case in order to change the battery. 
 
 
After the new battery CR1632 is in place it is possible to reassemble the remote key fob, and then program it to your car. The whole process should not be more than an hour. It is a simple process that does not require any special equipment. 
 
If you lose your key, the process is a bit more involved but it is still able to be completed. The dealer will first need to read the VIN of the vehicle and order the replacement TWICE module as well as key blade with the correct unique code. After that, they’ll be required to cut the replacement key and then program it using a new software tool called MDI. 
 
Replacement Key Fob 
 
The key fob is a device that locks and unlocks your car, it’s got an internal battery. Batteries are able to last for a short time and eventually die. This is a problem that happens with all cars and the good news is that you can replace the batteries on most key fobs and not have to replace the entire case. Amazon sells replacement fobs with all the electronics in place. You can simply remove the case and replace the batteries. It is important to keep in mind that you’ll have to take out the emergency key first, and you can accomplish this by inserting an incredibly small screwdriver with a flat head into the slot in the middle of the case. The case will split when you rotate the screwdriver around it. 
 
When you’re ready to replace the keys, ensure you have spare keys, as this will reduce your total cost by a significant amount. If you have a spare you can have the dealer cut a new key and program it to the car, which is much cheaper than replacing the entire key fob. 
 
It is possible to add another key to your car even if you don’t have one, but it takes some research and work. It costs a few hundred bucks to add an additional car key. The computer in the vehicle also has to be programmed. Professionals can do this, but it’s an expensive option. 
 
Replacement Ignition 
 
As opposed to earlier Saab automobiles, the new SAAB 9-3 models feature an advanced alarm system that is built around a coded key. If you lose your only key, it can be expensive to add another one since the car must have a special computer added and also be programmed to accept a new key. Dealers can even charge hundreds of dollars to program an entirely new key, even if they’re unable to complete the task. 
 
Dealers will charge you a high price to replace your car’s computer (also called the CIM or SAAB twice) when you lose the only working key. We can reprogram the existing EEPROM on your car’s computer so that it is ready for an additional key. This will save you more than 50% on the cost you spend at an auto dealer. 
 
If you’ve been a long-time owner of an 03-11 SAAB 9-3, then you probably have noticed that the ignition switch isn’t very robust. If your ignition key is not working properly, you should consider replacing it. They can become very sticky and the buttons can fall off. It’s not so difficult as it may seem to replace the ignition key. With the right tools, it is able to be accomplished in a matter of minutes.