visioncolon1

Avatar

Saab 9-3 Key Replacement Strategies From The Top In The Industry
How to Replace the Replacement Key Battery For the Saab 9-3 
 
Saab owners have a distinct set of steps to take to add a second key. saab key fob replacement requires the use of a handheld computer called Tech-2, to be used by the dealer. Then a new key and transponder need to be bought and then programmed into the car. 
 
It is a good idea to rotate your keys so that one does not wear out more quickly than the other. This will keep your keys in pristine condition. 
 
Replacement Case 
 
The new key fobs do not look like the old Saab keys. They’re equipped with electronic devices which make it hard to duplicate. This has made theft of cars significantly more difficult than it was twenty years ago. It has also made it more expensive to replace keys lost. 
 
Every owner of a Saab 9-3 should have at least two working keys. If one gets lost, it is expensive to add another to the car, as it requires replacing the CIM module and programming the locking cylinders. Dealers usually charge between $100-$200 for this. 
 
There are ways to avoid these costs. Some parts dealers can look up the code from an old key (usually the same one that opens the doors and turns off the ignition) and cut a brand new metal key blade at a fraction of the dealer’s cost. The key must be exactly the same as the original for it to function in your vehicle. 
 
Follow these steps to replace the case. You will need a flathead screwdriver and some patience. With the screwdriver slowly pry the plastic apart and separate the emergency keys from the case. Once the case is open, remove the electronics and put them back into the new case. Insert the correct key and badge into the case. 
 
Replacement Battery 
 
The replacement battery for the Saab 9-3 is an inexpensive component that can be replaced easily and quickly. This DIY video from YouTube Cyclone Cyd, a user on YouTube, explains how to replace the battery for the remote key fob in only four steps. This tutorial is compatible with any modern Saab key fob. However, the procedure could differ slightly. 
 
The first step is to find the button that lets off the backup key in the fob. This button is usually located on the back of your fob close to the Saab Logo. Then you will need a flathead screwdriver into the small hole in this button. This should be enough to open the case of the fob to allow you to replace the battery. 
 
Once you have installed the batteries CR1632, it is possible to rebuild your remote key fob. Then, you can program it into your car. The entire process should not take more than one hour. It is a very simple process that does not require any special tools. 
 
The process is more complicated if you lose your key, but it’s possible. The dealer will first need to read the VIN of the vehicle and order a replacement TWICE module and key blade with the correct unique code. Then, they’ll be required to cut the replacement key and then program it using a brand new tool for programming called MDI. 
 
Replacement Key Fob 
 
The key fob is the piece that locks and unlocks your car. It has an internal battery. They have a limited life span and will eventually fail. This is a common problem that happens to all cars and the good news is that you can replace the batteries in most fobs, without replacing the entire case. Amazon sells replacement fobs that already have all the electronic components installed. You can simply pop the case open and replace the batteries. You’ll need to take out the emergency key before you replace the batteries. To do this, you need to insert a small screwdriver that is flat into the slot in the middle. The case should split when you turn the screwdriver around it. 
 
If you’re ready to replace your keys, have a spare available. This will save you a lot of money. If you have an extra key, ask the dealer to cut it in half and program it to your car. This is less expensive than purchasing a new key fob. 
 
 
It is possible to add a second key to your vehicle If you don’t already have one, but it takes lots of research and work. It can cost a few hundred dollars to get an additional car key. The computer of the vehicle must also be programmed. This can be accomplished by a professional, but it’s a costly choice for most owners. 
 
Replacement Ignition 
 
The modern SAAB 9-3 is an alarm system that is more sophisticated that is based on a key code. This means that when you lose your sole functioning key, getting another one could be very expensive as the car has to have a computer module installed, and it also needs to be specifically programmed to accept a new key. The majority of locksmiths aren’t able to do this or even dealers can charge several hundred dollars just to program the new key! 
 
Dealers will charge you the highest price to replace your car’s computer (also called the CIM or SAAB twice) when you lose your only working key. We can reprogramme the existing EEPROM in your car computer so that it’s ready for an extra key. This will save you more than 50% off the cost you would pay the dealer. 
 
If you’ve been an owner of a 03-11 SAAB 9-3, you likely know that the ignition key isn’t very robust. If your ignition key is not functioning properly, it is time to look into replacing it. They can become extremely sticky and the buttons have been known to fall off. It’s not as difficult as it appears to replace the ignition key. With the right tools, it can be accomplished in a matter of minutes.